- High Silver Brazing Alloy
- 2017-12-15 20:41
- High Silver brazing alloy owns good properties such as low melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity, electrical conductivity and corrosion resistance.
- Phoscopper Brazing Alloy
- 2017-12-14 17:57
- Copper phoscopper brazing alloy are principle elements of the product, it owns good fluidity and is applied in the resistance brazing, flame brazing and high frequency brazing. It is used in brazing of copper and copper alloys, but not in brazing of ferro
- Low-silver Copper Phosphorus Brazing Alloy
- 2017-12-11 18:10
- The product is used for brazing of copper and copper alloys. It has low melting point, excellent fluidity, good brazing properties. The brazing joint has high mechanical strength and smooth surface. Flux is unnecessary when brazing copper.
- Pure Copper Solder
- 2017-12-03 20:08
- Pure Copper brazer is applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc.
- Silver Paste
- 2017-12-01 04:27
- After the preparation of silver brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage。The product can be used to complex structure, with higher bra
- Bronze Brazing Paste
- 2017-11-28 13:36
- After the preparation of bronze brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage. Product is suitable for brazing copper, bronze and steel, et
- Flux Cored Silver Brazing Alloy
- 2017-11-23 09:27
- The silver brazing alloy can be made into flux cored brazing alloy. Flux cored silver brazing alloy is applicable to automatic brazing. It has higher production efficiency, saves the material consumption. And it can be used to braze without flux.
- Sn-Ag-Cu Solder
- 2017-11-22 05:14
- Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta
- Nickel Bronze Brazing Alloy
- 2017-11-15 04:20
- Nickel bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The strength of joint is hig
- Silver-aluminium Alloys
- 2017-11-12 17:31
- Aluminum alloy solders are applied for joinning aluminum to aluminum alloys. It is not suitable for joinning other metals as the oxide on the surface of aluminum solder is difficult to be removed, furthermore the brittle intermetallic compounds formed by
- Tin Bronze Brazing Alloy
- 2017-10-28 23:42
- Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used.
- Medium-silver Copper Phosphorus Brazing Alloy
- 2017-10-01 19:44
- The product is used for brazing of copper ,copper alloys and other alloys. It has lower melting point,more excellent fluidity, better brazing properties than the low-silver copper phosphorus brazing alloy. The brazing joint has high mechanical strength an
- Silver Copper Alloy
- 2017-09-07 04:11
- Silver Copper alloys is a kind of silver-based solid solution. It has goodproperties such as appropriate melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity and electrical conductivity.
- Aluminum Brazing Alloy
- 2017-09-01 03:11
- Aluminum alloys solder is applied for joinning aluminum to aluminum alloys, or some aluminum solders can be used for joinning aluminum to copper. It is not suitable for joinning other metals as the oxide on the surface of aluminum solder is difficult to b
- Flux Coating Silver Brazing Alloy
- 2017-08-21 04:52
- The silver brazing alloy can be made into flux coating brazing alloy. Flux coating silver brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption.
- Silicon Bronze Brazing Alloy
- 2017-08-04 06:03
- Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The surface is bright and clean
- Tin Bearing Silver Phoscopper Brazing Alloy
- 2017-08-01 03:18
- tin bearing silver phoscopper brazing alloy The product is used for brazing of copper and copper alloys. It has a lower melting point, excellent fluidity, good brazing properties. The brazing joint has high mechanical strength and smooth surface. Flux is
- Silver Power
- 2017-07-28 11:18
- The silver brazing alloy can be made intopowder, It is suitable for the brazing of narrow gap and complex components. It can save the dosage。
- Silver-copper-nickel Brazing Alloys
- 2017-07-20 07:52
- silver-copper-nickel brazing alloys is a kind of silver-based solid solution. It has good properties such as high mechanical strength, good plasticity and electrical conductivity. It is applied to the brazing of ferrous metals and non-ferrous metals, such
- Brass Brazing Paste
- 2017-07-05 13:14
- After the preparation of Brass brazing alloy into powder,make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components. Product is suitable for brazing carbide.
