Model Number: YDA67
Brand Name: YD
Key Specifications/Special Features:
Sleeve Anchor , Zinc Plated with Good QualitySIZE DETAILS:I.Material: Q195II.Diameter: M4, 5, 6, 8, 10, 12, 16, 18, 20, 24, 27 (3/16, 1/4, 5/16, 3/8, 1/2, 5/8and 3/4-inch)
III.Length: 30 to 250mm
IV.Surface: blue zinc planted
V.Packing: small box andbulk
How To UseI.Drill or core a hole to the recommended diameter and depth. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
II.Insert the fix bolt shield into the hole, nut end first, and tap with a hammer until it sits flush with the surface of the substrate.
III.Position the fixture over the shield, insert the correct diameter bolt or stud through the fixture and tighten.
| Size (mm) |
Drill Diameter (mm) |
Drill Depth (mm) |
| 6x30x8 |
8 |
30 |
| 6x40x8 |
8 |
40 |
| 8x50x10 |
10 |
50 |
| 8x150x10 |
10 |
150 |
| 10x60x12 |
12 |
60 |
| 10x200x12 |
12 |
200 |
| 12x80x16 |
16 |
80 |
| 12x200x16 |
16 |
200 |
| 16x80x20 |
20 |
80 |
| 16x200x20 |
20 |
200 |
Company Profile
